Features and Functions 3
Agilent U1251A/U1252A User’s and Service Guide 73
Reviewing Logged Data
1 Press for more than 1 second to enter the Log
Review mode. The last recorded entry and the last logging
index are displayed.
2 Press to switch between hand (manual) and interval
(automatic) logging review mode.
3 Press to ascend or to descend through the logged
data. Press to select the first record and press to
select the last record for quick navigation.
4 Press for more than 1 second at the respective Log
Review mode to clear logged data.
5 Press for more than 1 second to exit mode.
During the data review in either manual or interval logging
mode, Press for more than one second to clear all the
logged values.
To Next Page
Loading...
