Features and Functions 3
Agilent U1251A/U1252A User’s and Service Guide 69
Data Logging
The Data logging function makes it easy to record test data
for future review or analysis. Since data are stored in the
non- volatile memory, they are retained when the meter is
turned OFF or when the battery is changed. There are two
options - hand (manual) logging and interval (automatic)
logging. Data logging records the values on primary display
only.
Manual Logging
Hand (Manual) logging can be specified in Setup mode.
1 Press for more than 1 second to store the present
value and function on the primary display to the
non- volatile memory. and the logging index are
indicated. The logging index flashes on the secondary
display for 3 seconds before returning to normal display.
2 Press again to save the next value into the
permanent memory.
To use the data logging function, you will need to connect the multimeter
to a PC using the U1173A IR-to-USB cable (purchased separately) and
download the data logging software from Agilent’s website. Please go to:
http://www.agilent.com/find/hhTechLib to download the software.
To Next Page
Loading...
Need help?
General
