ahlmann AS 210 - Controls

S220/S221/S230/S231/Z2004-6
4 Description
6
7
8
2
1
3
4 5
4
1
2
5
6
3
5
4
18
17
16
15
14
13
6
7
8
9
10
11
12
!
1
32
19
4.8 Controls
1 - Lock lever for steering column adjustment
- to the front/rear
- in axial steering column direction
2 - Steering column switch
- to the front: turn signal, right
- to the rear: turn signal, left
- up: Dipped beam
- down: High beam
- Pushbutton: Signal horn
- Turn, step 1: Interval windshield wiper, front
- Turn, step 2: Windshield wiper, front
- Push upper ring in axial direction:
Windshield washer, front
3 - Swivelling pedal
4 - Indicator: 2nd gear
5 - Indicator: 1st gear
6 - Toggle switch for hazard flasher system
7 - free
8 - Indicator: hydraulic drive stage "slow"
1 - Indicator lamp assembly
2 - Fuel gauge
3 - Coolant temperature gauge
4 - Operating hours meter
5 - Tachometer
6 - Engine oil pressure indicator lamp
7 - free
8 - Parking brake indicator lamp
9 - Hydraulic oil temperature indicator lamp
10 - Turn signal indicator lamp
11 - free
12 - High beam indicator lamp
13 - free
14 - free
15 - Hydraulic oil filter clogging indicator
16 - Service brake failure indicator lamp
and warning buzzer
17 - Glow start system (option)
18 - Battery charge indicator lamp
19 - Indicator lamp for low cooling water/
coolant temperature
1 - Pushbutton for releasing the quick-change device
(for loaders with bolt lock together with the lower
button 4-9/3 = standard equipment)
2 - Toggle switch for rear wiper/washer
3 - Accelerator
4 - Service brake pedal
5 - Starter switch
6 - Toggle switch for driving lights
- Position I: Parking light
- Position II: Road light
Figure 4-5
Figure 4-7
Figure 4-6