4
Chapter4 Client Program 117
• Drag and select the Response value and press Ctrl+C to copy it.
• Res
ponse: Press Ctrl+V to paste it and press the Enter key.
3 Go
through the authentication process required by the application.
Change User Password
1 Right-click on the TrusGuard Auth icon ( ) in the Windows notification area.
2 From the menu, click Chang
e Password (appears when you are logged in).
3 Th
e window to change the password will appear.
• Password: Enter the currentpassword.
• New Password: Enter a new password.
• Co
nfirm Password: Enter the new password again.
4 Click OK.
Note
The password must:
- be a combination of alphab
ets and numbers
- not contain five or more forward or reverse sequence of numbers or
alphabets (e.g.: abcdef13!)
- not contain the same character more than three times in a row
- not contain special characters: & < > $ " '
Exit
If you exit TrusGuard Auth, your user session will also end.
1 Righ
t-click on the TrusGuard Auth icon ( ) in the Windows notification area.
2 Click Exitfrom the popup menu.
Remove TrusGuard Auth
TrusGuard Auth is not “installed”, so the set value is not recorded in the registry, and there is no
separate ini file. To remove TrusGuard Auth, just remove the TrusGuard Auth file from the computer.
To Next Page
Loading...