FS2 v2.1r1 www.aja.com
52
8 Hidden Menus This parameter lets you choose whether to hide or show inactive menus.
9 Screen Saver This parameter lets you choose the menu screen saver.
10 Display Intensity This parameter determines the brightness of the alphanumeric display and front panel
LEDs.
11 Fan Speed This parameter determines the speed (and sound level) of the FS2's internal cooling fans.
To prevent system damage, this setting may be overridden temporarily, and the fan can
be set to a higher speed if the system detects very high internal temperatures. Changes
to this setting are automatically saved
12 Serial Number This parameter displays the FS2’s unique serial number.
13 Software Version This parameter displays the FS2’s software version number.
14 Reboot This parameter lets you reboot the FS2. Press and hold in both front panel knobs
simultaneously to reboot.
During reboot, the display shows [Re
booting], goes dark momentarily, and then shows
the percentage of progress as the system reboots. Rebooting takes a couple of minutes.
PRESET Menu Group
The PRESET Menu Group provides the means of saving, editing the names of, and loading
FS2 presets. A preset is a set of all System, Video 1/2, Audio 1/2, and Output parameters
as they were set at the time the preset was stored.
Hide Inactive (default)
Show All
Hides menus that are not in use.
Shows all menus, even those that are not in use.
On (AJA Logo) (default)
Off
System Name
AJA logo screen saver is displayed
Screen saver is turned off.
Screen saver displays the system name.
Variable Dim or brighten the alphanumeric display and activity indicator
LEDs in steps from 1 (dim) to 8 (brightest).
Default: 6
Variable Changes the fan speed in steps from 1 (slow) to 10 (fast).
Default is 10.
Caution!
When you recall a Preset Configuration, the recalled preset immediately replaces the
sy
stem’s existing configuration. All previous settings are lost unless you have
previously stored them in another preset configuration or an exported file.
To Next Page
Loading...
