FS2 v2.1r1 www.aja.com
94
Hidden Menus This selection lets you choose whether to hide or show inactive menus.
Display Intensity Display Intensity determines alphanumeric display and front panel LED brightness.
UPnP Host UPnP Host enables the FS2 to be discovered by a Windows network.
When this parameter is enabled, you can view th
e FS2 on a Windows Network by clicking
these selections in Windows 7: Start > Computer > Network (in left pane). Any FS2s on the
network will be listed under Other Devices below Computers and Media Devices. If your
system does not have network discovery enabled, you may need to enable it following
the Windows help instructions to make network devices visible in the Windows Network
window.
UPnP Proxy UPnP Proxy enables the FS2 to serve as a proxy for other AJA devices, allowing them to be
discovered on a Windows network through the FS2. When enabled, the FS2 acts as a
proxy for all the AJA devices that it is able to connect to that have not already been
discovered on the network. The devices will be listed in the FS2 Network window. Once
the devices appear on the network, they can connect directly to other devices and
computers without involving the FS2.
Hide Inactive (default)
Show All
Hides menus that are not in use.
Shows all menus, even those that are not in use.
Variable Use the slider to dim or brighten the alphanumeric display and
activity indicator LEDs in steps from 1 (dim) to 8 (brightest).
Default is 6
Enable (default)
Disable
Enables the FS2 to be discovered by a Windows network.
Disables Windows network discovery of the FS2.
Enable (default)
Disable
Enables the FS2 to connect other AJA devices to the
network.
Disables the FS2 from serving as a proxy for AJA devices.
To Next Page
Loading...
