Parameter Set-up:
Validity Term: select validity term among three options: “Always”,
“ Schedule” and “ Never”. if you select “Always”, then the door
access via PIN code will always be valid with no restriction. If you
select “ Schedule”, then you are required to select among the
created schedule for user-based PIN code access. If you select
“Never” then the PIN code access will never be valid.
Frequency: set the total number of valid PIN code access allowed.
All Schedule: select from the created door access schedule on the
right box and move the one to be applied to the user(s)-specific PIN
code door access to the box on the right side.
To Next Page
Loading...
