Action to Execute: check the box to enable or disable the SIP/IP Call.
If you want to be notified via SIP/IP call when abnormal
temperature and low temperature is detected.
SIP/IP Call Number: enter the SIP or IP call for the notification.
The field will appear for you to fill in SIP/IP numbers when you
check the box in the Action to Execute field.
12.4.7.2. Ambient Temperature Configuration
In order to offset the minor variations on the temperature as affected
by the ambient temperature in the different places where the device
is installed or in the different time of a day, you are required to
configure the temperature setting on the basis of time segments
during a day.
To do the configuration, you can do as follows:
To Next Page
Loading...
Need help?
General
