AKUVOX SMART INTERCOM www.akuvox.com
Parameter set-up:
Enabled: Tick the check box if want to enable the card reader LED
lighting and vice versa.
Start Time - End Time (H): enter the time span for the LED
lighting to be valid, e.g. if the time span is from 18-22 it means
LED light will stay on during the time span from 6:00 pm to
10:00 pm during one day (24 hours).
7.3.2. Configure LED White Light Setting
LED White light is used to reinforce the lighting for facial recognition
as well as for the QR code access as needed in the dark environment.
You can set the white light function properly on the device web
interface.
To Next Page
Loading...
Need help?
General
