AKUVOX SMART INTERCOM www.akuvox.com
7.3. LED Setting
7.3.1. Configure Card Reader LED Setting
You can enable or disable the LED lighting on the card reader area as
needed on the web interface. Meanwhile, If you do not want to have
the LED light on the card reader area to stay on, you can also set the
timing for the exact time span during which the LED light can be
disabled in order to reduce the electrical power consumption.
To do the configuration, you can do as follows:
1. Click Device > Light > LED of Swiping Card Area
2. Set the parameter and click Submit tab for the validation.
To Next Page
Loading...
