Authorization Enabled: Tick the check box to enable the RTSP
authorization. If you enable the RTSP Authorization, you are
required to enter RTSP Authentication Type, RTSP Username,
RTSP Password on the intercom device such as indoor monitor for
authorization.
RTSP Authentication Type: select RTSP authentication type
between “ Basic” and “ Digest”. “Basic “ is the default
authentication type.
User Name: enter the name used for RTSP authorization.
Password: enter the password for RTSP authorization.
14.3.2. RTSP Stream Setting
You can select the video codec format for the RTSP stream for the
monitoring and you can also configure video resolution and bit-rate
etc.which based on your actual network environment on the web
To Next Page
Loading...
