Akuvox E16 Series User Manual

109
Note:
 DoorNum in the HTTP command above refers to the relay
12.4.4. Unlock by Exit Button by the Door
When you need to open the door from inside using the exit button
installed by the door, you can configure the door phone Input to
trigger the relay for the door access.
To do the configuration, you can do as follows:
1. Click Access Control > Input > Input
2. Tick Enabled to enable the Input function.
3. Set up the parameters according to your need.
4. Click Submit tab for the validation and Cancel tab for the
cancellation.

Akuvox E16 Series Specifications

General

Brand	Akuvox
Model	E16 Series
Category	Intercom System
Language	English