Power On + Repeatedly: select “Power On + Repeatedly” if you
want to combine Power On Mode and Repeatedly mode that will
enable the device to perform Autop every time it boots up or
according to the schedule you set up.
Hourly Repeat: select “Hourly Repeat” if you want the device to
perform Autop every hour.
19.4. DHCP Provisioning Configuration
Auto-provisioning URL can also be obtained using DHCP option which
allows device to send a request to a DHCP server for a specific DHCP
option code. If you wan to use Custom Option as defined by users with
option code range from 128-255), you are required to configure
DHCP Custom Option on the web interface.
To set up DHCP AutoP with “Custom Option” and “Power on” mode,
you can do as follows:
To Next Page
Loading...
