Akuvox E16 Series User Manual

147
enable or disable the remote system log.

Remote System Server: enter the remote server address to receive
the the device log. And the remote server address will be provide
by Akuvox technical support.
16.2. PCAP for Debugging
PCAP in E16 series door phone is used to capture the data package
going in and out of the devices for debugging and troubleshooting
purpose. You can set up the PCAP on the device web interface properly
before using it.
To do the configuration, you can do as follows:
1. Click Upgrade > Advanced > PCAP
2. Set up parameters properly.
3. Start PCAP data packets capturing by clicking on Start tab.
4. Stop PCAP data packets capturing by clicking on the Stop tab.
5. Export the data packets captured by PCAP by clicking on Export

Akuvox E16 Series Specifications

General

Brand	Akuvox
Model	E16 Series
Category	Intercom System
Language	English