AKUVOX SMART INTERCOM www.akuvox.com
To configure the time setting on the web interface, you can do as
follows:
1. Click Setting >Time/Lang > Time
2. Untick the check box to allow you to set the time and date
manually.
3. Tick the check box to enable the NTP server function that allows
you to synchronize your time setting via NTP server.
4. Enter the NTP server you obtained in the field of the primary and
secondary NTP server.
5. Set up the update timing via NTP server.
6. Click the Submit tab for the validation and the Cancel tab for the
cancellation.
To Next Page
Loading...
Need help?
General
