Server Mode: It is automatically set up according to the actual
device connection with a specific server in the network such as
SDMC or Cloud and None. None is the default factory setting
indicating the device is not in any server type, therefore you are
allowed to choose Cloud, SMDC in discovery mode.
Discovery Mode: click “Enabled” to turn on the discovery mode of
the device so that it can be discovered by other devices in the
network,and click “Disabled” if you want to conceal the device so
as not to be discovered by other devices.
Device Address: specify the device address by entering device
location information from the left to the right :Community, Unit,
Stair, Floor, Room in sequence.
Device extension: enter the device extension number for the device
you installed
Device Location: enter the location in which the device is installed
and used.
To Next Page
Loading...
