Alcatel-Lucent 7210 SAS-D - Equipment Checklist; Installing the 7210 SAS-D

Installing the 7210 SAS-D
7210 SAS-D Installation Guide Page 31
GR-1089-CORE, Issue 4) and require isolation from the exposed OSP
cabling. The addition of Primary Protectors is not sufficient protection in
order to connect these interfaces metallically to OSP wiring.
• Avoid installing copper cables close to strong electromagnetic fields
generated by electric generators, elevator engines, or other similar heavy
electric machines.
• Make sure you only use SFPs that are supported by Alcatel-Lucent.
Equipment Checklist
After unpacking your switch, check the contents to make sure all the components are
present. Before installation, make sure you have all the necessary equipment.