Alcatel-Lucent 7210 SAS-D - Figure 17: Wall Mounting the Chassis Using the Wall Mounting Screws; Wall Mounting

Installing the 7210 SAS-D
7210 SAS-D Installation Guide Page 35
Wall Mounting
Step 1 Measure the distance between the two wall mounting screw guides located on
the bottom of the chassis.
Step 2 Secure the two wall mounting screws to the desired location on the wall. See
Figure 16.
Figure 17: Wall Mounting the Chassis using the Wall Mounting Screws
Step 3 Secure the chassis to the wall by hooking the two wall mounting screws into
the wall mounting screw guides on the bottom of the chassis.
7210SASdc_0007
3
2
2
1
4
Note: For wall mounting the standard max ambient temperature is limited to 35 deg C and the
ETR max temperature is limited to 55 deg C. Wall mounting is not supported when using the
external power supply.