Alcatel-Lucent 7210 SAS-D - Installing the 7210 SAS-D; Figure 15: Installing the Switch in a Rack

Installing the 7210 SAS-D
7210 SAS-D Installation Guide Page 33
Step 2 Mount the 7210 SAS-D in the rack, using four rack-mounting screws (not
provided). See Figure 15.
Figure 15: Installing the Switch in a Rack
Step 3 If you are installing a single switch, proceed to "Grounding the Chassis" on
page 36.
Step 4 If installing multiple switches, mount them in the rack, one below the other,
in any order.
7210SASac_0005