Installing Your Switch
Page 32 7210 SAS-D Installation Guide
Installing Your Switch
Rack Mounting
If you plan to rack-mount your switch, make sure you have the following equipment
available:
• Bracket mounting kit, including the four mounting screws for each device you
plan to install in a rack (not included, and sold separately as: 3HE06696AA
7210 SAS-D rack mount kit)
• A screwdriver (Phillips or flathead, depending on the type of screws used)
To rack-mount your 7210 SAS-D:
Step 1 Attach the brackets to the device using the screws provided in the Bracket
Mounting Kit (sold separately). See Figure 14.
Figure 14: Attaching the Brackets
To Next Page
Loading...
