Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

BOF Configuration Overview
Page 106 7210 SAS M, X Basic System Configuration Guide
BOF Configuration Overview
The boostrap image is loaded from the boot.tim file. The BOF file performs the following tasks:
1. Sets up the uplink ports (speed, duplex, auto).
2. Assign the IP address (either statically or using DHCP) for the uplink port.
3. Assign the VLAN to the uplink port.
4. Create static routes for the uplink routes.
5. Sets the console port speed.
6. Configures the Domain Name System (DNS) name and DNS servers.
7. Configures the primary, secondary, tertiary configuration source.
8. Configures the primary, secondary, and tertiary image source.
9. Configures operational parameters.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English