Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

Boot Option Files
7210 SAS M, X Basic System Configuration Guide Page 141
Show Commands
bof
Syntax bof [cflash-id | booted]
Context show
Description This command displays the Boot Option File (BOF) executed on last system boot or on the specified
device.
If no device is specified, the BOF used in the last system boot displays. If the BOF has been modified
since the system boot, a message displays.
Parameters cflash-id. The cflash directory name.
Values cf1:
booted — Displays the boot option file used to boot the system.
Output Show BOF Fields — The following table describes BOF output fields.
Table 15: Show BOF Output Fields
Label Description
primary-image
The primary location of the directory that contains the runtime images
of both CPM and IOM.
primary-config
The primary location of the file that contains the configuration.
primary-dns
The primary DNS server for resolution of host names to IP addresses.
secondary-image
The secondary location of the directory that contains the runtime
images of both CPM and IOM.
secondary-config
The secondary location of the file that contains the configuration.
secondary-dns
The secondary DNS server for resolution of host names to IP
addresses.
tertiary-image
The tertiary location of the directory that contains the runtime images
of both CPM and IOM.
tertiary-config
The tertiary location of the file that contains the configuration.
tertiary-dns
The tertiary DNS server for resolution of host names to IP addresses.
persist
on — Persistent indexes between system reboots is enabled.
off — Persistent indexes between system reboots is disabled.
wait
The time configured for the boot to pause while waiting for console
input.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English