Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

System Management
7210 SAS M, X Basic System Configuration Guide Page 305
memory-pools
Syntax memory-pools
Context show>system
Description This command displays system memory status.
Output Memory Pools Output — The following table describes memory pool output fields.
Sample Output
A:ALA-1# show system memory-pools
===============================================================================
Memory Pools
===============================================================================
Name Max Allowed Current Size Max So Far In Use
DNS Server
The IP address of the DNS server.
DNS Domain
The DNS domain name of the node.
BOF Static Routes
To — The static route destination.
Next Hop — The next hop IP address used to reach the destination.
Metric — Displays the priority of this static route versus other static
routes.
None — No static routes are configured.
Label Description (Continued)
Table 23: Show Memory Pool Output Fields
Label Description
Name
The name of the system or process.
Max Allowed
Integer — The maximum allocated memory size.
No Limit — No size limit.
Current Size
The current size of the memory pool.
Max So Far
The largest amount of memory pool used.
In Use
The current amount of the memory pool currently in use.
Current Total Size
The sum of the Current Size column.
Total In Use
The sum of the In Use column.
Available Memory
The amount of available memory.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English