File System Management
7210 SAS M, X Basic System Configuration Guide Page 81
Displaying Directory and File Information
Use the dir command to display a list of files on a file system.
The type command displays the contents of a file.
The version command displays the version of a cpm.tim or iom.timfile.
Use the CLI syntax displayed below to display directory and file information:
CLI Syntax: file>
dir [file-url]
type file-url
version file-url
The following displays an example of the command syntax:
*A:card-1>file cf1:\ # dir
Volume in drive cf1 on slot A is /flash.
Volume in drive cf1 on slot A is formatted as FAT32.
Directory of cf1:\
10/22/2008 10:30a 8849 bootlog.txt
10/22/2008 10:30a 733 bof.cfg
10/22/2008 10:29a 5531 bootlog_prev.txt
02/01/2001 09:25a 3528373 boot.tim
02/01/2001 09:21a 4860 config.cfg
10/22/2008 11:07a <DIR> test1
10/17/2008 07:32p 724 env.cfg
10/15/2008 03:38p 9499 snake.cfg
7 File(s) 3558569 bytes.
1 Dir(s) 53135360 bytes free.
To Next Page
Loading...
