Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

System Management
7210 SAS M, X Basic System Configuration Guide Page 203
System Administration Parameters
Use the CLI syntax displayed below to configure various system administration parameters.
Administrative parameters include:
• Validating the Golden Bootstrap Image on page 203
• Updating the Golden Bootstrap Image on page 204
• Disconnect on page 204
• Set-time on page 205
• Display-config on page 205
• Save on page 207
• Reboot on page 208
• Post-Boot Configuration Extension Files on page 209
Validating the Golden Bootstrap Image
The admin>check-golden-bootstrap command validates the current golden bootstrap image, and
displays its version. A default golden bootstrap image is installed on every 7210 SAS M unit.
CLI Syntax: admin
check-golden-bootstrap
Example
: admin# check-golden-bootstrap
The following example displays the output.
version TiMOS-L-0.0.I312
Golden Bootstrap Image validation successful

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English