System Commands
Page 318 7210 SAS M, X Basic System Configuration Guide
time-range
Syntax time-range name associations [detail]
Context show>cron
Description This command displays information on the configured time ranges.
Output Time Range Output — The following table displays system time range output fields:
Sample Output
The following example shows time-range detail output.
A:ala# show cron time-range time-range2 detail
===============================================================================
Cron time-range
===============================================================================
Name : time-range1
Periodic : Start * * * * End * * * *
Absolute : Start * * * * End * * * *
The following example shows output for time-range associations with previously created IP and
MAC filters.
A:ala# show cron time-range day associations
===============================================================================
Cron time-range associations
===============================================================================
Name : day State : Inactive
-------------------------------------------------------------------------------
IP Filter associations
-------------------------------------------------------------------------------
IP filter Id : 10, entry 1010
-------------------------------------------------------------------------------
MAC Filter associations
-------------------------------------------------------------------------------
None
-------------------------------------------------------------------------------
Tod-suite associations
-------------------------------------------------------------------------------
Tod-suite : suite_sixteen, for Ingress Qos Policy "1160"
Tod-suite : suite_sixteen, for Ingress Scheduler Policy "SchedPolCust1_Day"
Tod-suite : suite_sixteen, for Egress Qos Policy "1160"
Tod-suite : suite_sixteen, for Egress Scheduler Policy "SchedPolCust1Egress_Day
===============================================================================
Table 27: Show System Time-range Output Fields
Label Description
Associations
Shows the time-range as it is associated with the TOD suites and ACL
entries as well as the SAPs using them.
Detail
Shows the details of this time-range.