Alcatel-Lucent 7210 SAS M - Table 28: System Timing Output Fields

System Management
7210 SAS M, X Basic System Configuration Guide Page 319
uptime
Syntax uptime
Context show
Description This command displays the time since the system started.
Output Uptime Output — The following table describes uptime output fields.
Sample Output
A:ALA-1# show uptime
System Up Time : 11 days, 18:32:02.22 (hr:min:sec)
A:ALA-1#
sync-if-timing
Syntax sync-if-timing
Context show>system
Description This command displays synchronous interface timing information.
Output System Timing Output — The following table describes sync-if-timing output fields.
Table 28: System Timing Output Fields
Label Description
System Up Time
Displays the length of time the system has been up in days,
hr:min:sec format.
Label Description
System Status CPM A
Indicates the system status of CPM A.
Reference Input Mode
Indicates the reference input mode.
Reference Order
Indicates the reference order.
Reference Input 1
Displays information about reference input 1