Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

Common Configuration Tasks
Page 180 7210 SAS M, X Basic System Configuration Guide
Coordinates
Use the optional coordinates command to specify the GPS location of the device. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed within double
quotes.
Use the following CLI syntax to configure the location:
CLI Syntax: config>system
coordinates coordinates
Example
: config>system# coordinates "N 45 58 23, W 34 56 12"
The following example displays the configuration output of the general system commands:
output sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
. . .
exit
----------------------------------------------
A:ALA-12>config>system#

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English