Boot Option Files
7210 SAS M, X Basic System Configuration Guide Page 107
Basic BOF Configuration
The parameters which specify location of the image filename that the router will try to boot from
and the configuration file are in the BOF.
The most basic BOF configuration should have the following:
• Uplink port parameters
• Primary image location
• Primary configuration location
Following is a sample of a basic BOF configuration.
A:7210>show# bof
===============================================================================
BOF (Memory)
===============================================================================
primary-image ftp://*:*@135.254.170.29//import/panos_builds/nightly/2.0
/S80/MTU-sultan/
primary-config tftp://10.135.25.100/MTU/mtu3DGP.cfg
#eth-mgmt Port Settings:
eth-mgmt-disabled
#uplinkA Port Settings:
uplinkA-port 1/1/24
uplinkA-address 0
uplinkA-vlan 0
#uplinkB Port Settings:
uplinkB-port 1/1/2
uplinkB-address 0
uplinkB-vlan 0
#System Settings:
wait 3
persist off
console-speed 115200
===============================================================================
A:7210>show#
To Next Page
Loading...
