File Management Commands
Page 130 7210 SAS M, X Basic System Configuration Guide
tertiary-config
Syntax tertiary-config file-url
no tertiary-config
Context bof
Description This command specifies the name and location of the tertiary configuration file.
The system attempts to use the configuration specified in tertiary-config if both the primary and
secondary config files cannot be located. If this file cannot be located, the system boots with the
factory default configuration.
Note that if an error in the configuration file is encountered, the boot process aborts.
The no form of the command removes the tertiary-config configuration.
Default none
Parameters file-url — The tertiary configuration file location, expressed as a file URL.
Values local-url [cflash-id/][file-path]
cflash-id cf1:
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
tertiary-image
Syntax tertiary-image file-url
no tertiary-image
Context bof
Description This command specifies the tertiary directory location for runtime image file loading.
The system attempts to load all runtime image files configured in the primary-image first. If this
fails, the system attempts to load the runtime images from the location configured in the secondary-
image. If the secondary image load fails, the tertiary image specified in tertiary-image is used.
The no form of the command removes the tertiary-image configuration.
Default none
Parameters file-url — The location-url can be either local (this flash) or a remote FTP server.
Values file-url [local-url | remote-url] (up to 180 characters)
local-url [cflash-id/][file-path]
remote-url [{ftp://|tftp://} login:pswd@remote-locn/][file-path]
cflash-id cf1:
To Next Page
Loading...
Need help?
General
