Boot Option Files
7210 SAS M, X Basic System Configuration Guide Page 133
uplinkA-port
Syntax uplinkA-port port-id
no uplinkA-port
Context bof
Description This command configures the primary port to be used for boot up.
The no form of the command removes all the uplinkA parameters from the BOF.
Parameters port-id — Specifies the primary port to be used for boot up in the slot/mda/port format.
uplinkB-port
Syntax uplinkB-port port-id
no uplinkB-port
Context bof
Description This command configures the secondary port to be used for boot up.
The no form of the command removes all the uplinkB parameters from the BOF.
Parameters port-id — Specifies the secondary port to be used for boot up in the slot/mda/port format.
uplinkA-route
Syntax [no] uplinkA-route ip-address/mask next-hop ip-address
Context bof
Description This command configures an uplink-A static route.
Parameters ip-address — The IP address of the Boot Option File (BOF). This address must be unique within the
subnet and specified in dotted decimal notation.
mask — The subnet mask length when the IP prefix is specified in CIDR notation. When the IP prefix
is specified in CIDR notation, a forward slash (/) separates the ip-addr from the mask-length
parameter. The mask length parameter indicates the number of bits used for the network portion
of the IP address; the remainder of the IP address is used to determine the host portion of the IP
address.
Values 0 — 32
next-hop ip-address — The next hop IP address used to reach the destination.
To Next Page
Loading...
Need help?
General
