Alcatel-Lucent 7210 SAS M Basic System Configuration Guide

System Management
7210 SAS M, X Basic System Configuration Guide Page 303
Output System Information Output — The following table describes the system information output
fields.
Label Description
System Name
The configured system name.
System Contact
A text string that describes the system contact information.
System Location
A text string that describes the system location.
System Coordi-
nates
A text string that describes the system coordinates.
System Up Time
The time since the last boot.
SNMP Port
The port number used by this node to receive SNMP request messages
and to send replies.
SNMP Engine ID
The SNMP engineID to uniquely identify the SNMPv3 node.
SNMP Max Message
Size
The maximum SNMP packet size generated by this node.
SNMP Admin State
Enabled — SNMP is administratively enabled and running.
Disabled — SNMP is administratively shutdown and not running.
SNMP Oper State
Enabled — SNMP is operationally enabled.
Disabled — SNMP is operationally disabled.
SNMP Index Boot
Status
Persistent — System indexes are saved between reboots.
Not Persistent — System indexes are not saved between
reboots.
Telnet/SSH/FTP
Admin
Displays the administrative state of the Telnet, SSH, and FTP sessions.
Telnet/SSH/FTP
Oper
Displays the operational state of the Telnet, SSH, and FTP sessions.
BOF Source
The location of the BOF.
Image Source
Primary — Indicates that the directory location for runtime image
file was loaded from the primary source.
Secondary — Indicates that the directory location for runtime
image file was loaded from the secondary source.
Tertiary — Indicates that the directory location for runtime image
file was loaded from the tertiary source.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English