Alcatel-Lucent 7210 SAS M - Page 332

System Commands
Page 332 7210 SAS M, X Basic System Configuration Guide
Clear Commands
completed
Syntax completed [action-name] [owner action-owner]
Context clear>cron>action
Description This command clears completed CRON action run history entries.
Parameters action-name — Specifies the action name.
Values maximum 32 characters
owner action-owner — Specifies the owner name.
Default TiMOS CLI
screen
Syntax screen
Context clear
Description This command allows an operator to clear the Telnet or console screen.
sync-if-timing
Syntax sync-if-timing {ref1 | ref2}
Context clear>system
Description This command allows an operator to individually clear (re-enable) a previously failed reference. As
long as the reference is one of the valid options, this command is always executed. An inherent
behavior enables the revertive mode which causes a re-evaluation of all available references.
Parameters ref1 — clears the first timing reference
ref2 — clears the second timing reference
trace
Syntax trace log
Context clear