Overview of the 7705 SAR-A
38 7705 SAR-A Chassis Installation Guide
The CLI syntax follows the structure of IOM number/MDA number/port number. The IOM
and MDA do not need to be physically provisioned. When specifying a port, the IOM is
always 1 and the MDA must be specified as:
• 1 for Ethernet ports (both variants)
• 2 for T1/E1 ports (only on the variant equipped with T1/E1 ports)
The port number is from 1 to 12 for Ethernet ports and from 1 to 8 for T1/E1 ports.
To Next Page
Loading...
