Alcatel-Lucent 7750 - Page 303

Command Reference
7750 SR Interface Configuration Guide Page 303
— [no] ppp port-id
Tools Commands
tools
— dump
— aps aps-id [clear]
— aps mc-aps-signaling [clear]
— aps mc-aps-ppp [clear]
— eth-tunnel tunnel-index [clear]
— frame-relay port-id
— lag lag-id lag-id
— map-to-phy-port {ccag ccag-id | lag lag-id | eth-tunnel tunnel-index} {isid isid [end-isid
isid] | service service-id | svc-name [end-service service-id | svc-name]} [summary]
— lag port-id
— redundancy
— multi-chassis
— mc-ring
— srrp-sync-data [instance instance-id] [peer ip-address]
— sync-database [peer ip-address] [port port-id | lag-id] [sync-tag
sync-
tag] [application {dhcps | igmp| igmp-snooping | mc-ring | srrp | sub-
mgmt | mld-snooping}] [detail] [type {alarm-deleted | local-deleted}]
tools
—perform
— aps
— clear aps-id {protect | working}
— exercise aps-id {protect | working}
— force aps-id {protect | working}
— lockout aps-id
— request aps-id {protect | working}
—eth-ring
— clear ring-id
— This command clears a physical port that is acting as the working circuit for
this APS group. force ring-id path {a | b}
— manual ring-id path {a | b}
— ima
— reset bundle-id
— lag
— clear-force
all-mc
— clear-force lag-id lag-id [sub-group sub-group-id]
— clear-force peer-mc ip-address
— force all-mc {active|standby}
— force lag-id lag-id [sub-group sub-group-id] {active|standby}
— force peer-mc peer-ip-address {active|standby}
— load-balance lag-id lag-id [class {1|2|3}]