Alcatel-Lucent 8244 DECT Handset - Getting Started with Your Handset; Unboxing and Initial Setup

Getting started
8AL90396ENAAed01
15 /90
2 
In order to have a fully operational 8244 DECT handset, make sure that you have the following items with
your handset: the battery, the AC/DC adapter, and the power supply.
2.1 Unboxing
• The 8244 DECT Handset with the
fixed belt clip.
• The battery.
• The battery cover.
The safety and regulatory
instructions to be read
carefully.
A desk charger for your phone is needed (single or dual charger). The charger is sold separately.
2.2 Installing the battery in the telephone
If the belt clip is installed, you must lift it up and maintain it in this
position during the operation.
Lift up the cover.
Inserting the battery:
• Position the battery 'connectors ' side as shown in the
drawing (A).
• Terminate the installation of the battery in its
compartment by pressing as shown in the drawing (B).
Replace the cover.
A
B



