• Depending on the type of system concerned, registration may require one or more additional operations
on the system.
During registration phase, to improve security and optimize registration in a multi-system environment, the
handset enforces a minimum signal strength level to accept to register to a base station. To achieve the
conditions, it is recommended to perform registration in a place where a base station is in direct visibility
within a 20 m range. If base station is not visible the range shall be lowered.
During registration phase in a multi-system environment, all systems are scanned without priority. The
system is selected when the signal strength is above a certain level and registration matches.
7.3 Selecting your telephone system
Your telephone can be programmed to function on 4 different DECT systems (Alcatel-Lucent Enterprise or
GAP).
The selection is retained even after switching the telephone on/off. The selection of a specific system
forces operation on a specific system. This selection must be changed if one wishes to change system.
Selecting 'Auto. select' enables the telephone to connect automatically when it enters a system coverage
zone. If the systems programmed in the telephone have common coverage zones, the telephone selects
the first system found.
7.4 Display or modify the name of the connected system (network)
To Next Page
Loading...
