Programming your telephone
8AL90396ENAAed01
5.4.4 Switching rapidly from ring mode to vibrate mode and vice-versa
This feature is available if the ring shortcut option is activated in the handset settings (see: adjusting your
telephone functions).
• Long press on the ringer/vibrate key.
You switch quickly from the current ring mode to vibrate mode and vice-versa. This feature
depends on the current ringer/vibrate status of the handset. The first long press switches the
handset to the corresponding mode. The second long press switches back to the current
mode.
→ First long press on ringer/vibrate key
Second long press on ringer/vibrate key
When you turn the handset back on, the current mode will be the same as the mode selected
before it was turned off. For example, you are in the following mode: vibrate only. You switch
the handset off. When you restart the handset, the current mode will be: vibrate only. Long
press on the ringer/vibrate key to switch the handset to ring only.
5.5 Activating automatic answer on the headset
This mode allows you to answer calls automatically (without doing anything) and to direct the call to the
external headset.
• Select active/inactive as you wish.
• Apply.
5.6 Activating headset mode
You can use a headset with your phone. If you want the headset to ring only when receiving an incoming
call, you must activate the headset mode:
To Next Page
Loading...
