Alcatel-Lucent 8244 DECT Handset - Adjusting Your Telephone Functions; Adjusting Audio Functions

Programming your telephone
8AL90396ENAAed01
43 /90
• Audio settings
• Headset mode
• On
When activated only the headset rings (if plugged in).
5.7 Adjusting your telephone functions
• Access MENU.
• Settings
• Select the function* you want and use the On/Off softkeys to activate or deactivate the
function.
OR
• Select the function* you want and press the OK key to enter the function menu to
configure the function.
• Return to idle.
* You can activate or disable the following functions:
5.7.1 Adjusting audio functions
• Select the menu: Audio settings
• Select the settings to activate/deactivate.
• Vibrate/Ring: you can adjust the buzzer/ringer mode according to your needs.
• Ascending ringing: activate or deactivate the ascending ringtone (Progressive ringing)
(On / Off).
• Key sound: define the keypad tone (off, click or tone).
• Message sound → Message Ringtone: define the ringtone when you receive a new
message.
• Message sound → Msg ringtone level: define the ringtone level when you receive a new
message.
• Confirmat. sound: when a setting is updated, a confirmation sound is played.
• Coverage warning: activate or deactivate a Bip emission when your phone is out of DECT
area coverage (On / Off).
• Charger warning: activate or deactivate Bip emission when placing handset on charger
(On / Off).
• Low bat. warning: activate or deactivate Bip emission when low battery level is reached
(On / Off).
• Headset mode: activate or deactivate the headset mode (On / Off). When activated only
the headset rings (if plugged in).
• AGC: activate or deactivate automatic gain control to enhance the sound depending on
the quality of the audio signal (On / Off).
• Ring Shortcut: activate or deactivate the ringer/vibrate key to quickly switch the
ringer/vibrate mode (On / Off).
• Force calendar ring: activate/deactivate an audio signal, regardless of the ringer setting,
when you receive an appointment reminder.