Using the telephone in E-GAP or GAP mode
8AL90396ENAAed01
8.28 Configure the P1, P2 keys
A lock or speed dial feature can be associated with the P1 and P2 keys. Once configured these features
can be accessed by a short or a long press.
8.28.1 Define the feature to associate with the P1/P2 key
• P1 short press / P1 long press / P2 short press / P2 long press: select the key to
configure.
• Set the lock or call (speed dial) feature you want to associate with each key and key
press (short or long).
If you have linked the call feature to a P1 or P2 key, you have to configure the call feature (see chapter
below).
8.28.2 Define speed dial P1/P2 keys (long and short press)
This menu lets configure the call feature by defining name and number of your contact, linked to a P1 or P2
key, long or short press. The call feature (speed dial) has to be linked to the P1 or P2 key to be activated
(see chapter above).
• For each key and the kind of press (short or long), enter the name and the number of
the contact you wish to associate with the P key.
• Continue the configuration or return to idle.
To Next Page
Loading...
