OmniSwitch 6560 Chassis Details Chassis and Power Supplies
page 3-22 OmniSwitch 6560 Hardware Users Guide December 2019
Chassis Status LEDs
The chassis provides a series of status LEDs located on the front panel. These LEDs offer basic status
information for hardware operation and port link and activity status.
LED State Description
OK Solid Green
Blinking Green
Solid Amber
System Diagnostics and AOS bootup OK
System Diagnostics and AOS in progress
(i.e., performing diagnostics or booting)
System Diagnostics and/or AOS bootup failed
VC Solid Green
Solid Amber
Off
This unit is the master unit
This unit is a slave unit
This unit is in shutdown mode or is not part of
a VC.
PWR Solid Green
Solid Green
Solid Amber
Solid Amber
Off
Two power supplies are installed in the chassis
and both supplies are functioning normally.
One power supplies is installed in the chassis
and functioning normally (with the second
power supply bay empty).
Two power supplies are installed in the chassis
and one or both supplies has experienced
a failure.
One power supply is installed in the chassis
and has experienced a failure (with the second
power supply bay empty).
No power supply is present.
10/100/100 Port LEDs Solid Green
Blinking Green
Solid Amber
Blinking Amber
Valid port link (non-PoE)
Valid port link with activity (non-PoE)
Valid port link (PoE)
Valid port link with activity (PoE)
SFP+ Port LEDs Solid Green
Blinking Green
Valid port link
Valid port link with activity
To Next Page
Loading...
Need help?
General
