Configuring the Switch
122
3
• Broadcast Packets — Displays the number of good Broadcast packets received
on the interface since the device was last refreshed. This number does not include
Multicast packets.
• Multicast Packets — Displays the number of good Multicast packets received on
the interface since the device was last refreshed.
• CRC Align Errors — Displays the number of CRC and Align errors that have
occurred on the interface since the device was last refreshed.
• Undersize Packets — Displays the number of undersized packets (less than 64
octets) received on the interface since the device was last refreshed.
• Oversize Packets — Displays the number of oversized packets (over 1518 octets)
received on the interface since the device was last refreshed.
• Fragments — Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since
the device was last refreshed.
• Jabbers — Displays the total number of received packets that were longer than
1518 octets. This number excludes frame bits, but includes FCS octets that had
either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS
Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field
range to detect jabbers is between 20 ms and 150 ms.
• Collisions — Displays the number of collisions received on the interface since the
device was last refreshed.
• Utilization — Displays the percentage of the interface utilized.
Web – Click System, RMON, History, History Table and select an a history entry
number.
Figure 3-52. History Table Page
To Next Page
Loading...
