Configuring the Switch
130
3
Viewing Adjacent Devices
The AMAP Adjacencies Page provides network configuration information about the
systems connected to the device. The table displays the IP and MAC addresses of
the local port, and the IP and MAC addresses, and VLAN ID of the connected
devices.
Command Attributes
• Local Interface — Indicates a local interface that has a valid connection to an
adjacent device. The connected device's network ID information is displayed in the
table’s other columns.
• Device Type — Model name for the adjacent switch.
• Device Name – Indicates the adjacent switch's hostname.
• Remote Host Base MAC – Indicates the adjacent switch's MAC Address.
• Remote Interface – Indicate the remote interface port connected to the device.
• Remote VLAN – Indicate the remote Vlan connected to the adjacent switch.
• Remote IP Address – Indicate the remote switch’s IP address.
Web – Click System, Network Discovery, AMAP, AMAP Adjacencies. Select whether
to enable AMAP, enter the desired timeout intervals and click Apply.
Figure 3-57. AMAP Adjacencies Page
Console(config)# amap enable 4-345
Console(config)# amap discovery time 3000 4-346
Console(config)# amap common time 5000 4-346
To Next Page
Loading...
