Command Line Interface
424
4
clear arp-cache
The clear arp-cache Privileged EXEC mode command deletes all dynamic entries
from the ARP cache.
Syntax
clear arp-cache
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example deletes all dynamic entries from the ARP cache.
Related Commands
arp
arp timeout
show arp
The show arp Privileged EXEC mode command displays entries in the ARP table.
Syntax
show arp [ip-address ip-address] [mac-address mac-address] [ethernet
interface | port-channel port-channel-number]
Parameters
• ip-address — Displays the ARP entry of a specific IP address.
• mac-address — Displays the ARP entry of a specific MAC address.
• interface — Displays the ARP entry of a specific Ethernet port interface.
• port-channel-number — Displays the ARP entry of a specific Port-channel
number interface.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Console# clear arp-cache
To Next Page
Loading...
