Alcatel OmniStack LS 6248 - Clear Logging; Logging Buffered Size

Syslog Commands
595
4
logging buffered size
The logging buffered size Global Configuration mode command changes the
number of syslog messages stored in the internal buffer. To return to the default
configuration, use the
no form of this command.
Syntax
logging buffered size number
no logging buffered size
Parameters
• number — Specifies the maximum number of messages stored in the
history table. (Range: 20 - 400)
Default Setting
The default number of messages is 200.
Command Mode
Global Configuration mode
Command Usage
This command takes effect only after Reset.
Example
The following example changes the number of syslog messages stored in the
internal buffer to 300.
Related Commands
show logging
clear logging
The clear logging Privileged EXEC mode command clears messages from the
internal logging buffer.
Syntax
clear logging
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Console(config)# logging buffered size 300