Alcatel OmniStack LS 6248 - Defining RMON Alarms; Figure 3-54. Events Logs Page

Configuring the Switch
126
3
Figure 3-54. Events Logs Page
CLI – The following is an example of the CLI commands used to view RMON events
Logs:
Defining RMON Alarms
The Alarm Page contains fields for setting network alarms. Network alarms occur
when a network problem, or event, is detected. Rising and falling thresholds
generate events.
Command Attributes
• Unit No. — Displays the stacking member for which the RMON Alarms are
displayed.
• Alarm Entry — Indicates a specific alarm.
• Counter Name — Displays the selected MIB variable.
Console> show rmon events
4-514
Index Description Type Community Owner Last time sent
----- ----------- ---- --------- ----- --------------------
1 Errors Log CLI Jan 18 2002 23:58:17
2 High
Broadcast
Log-
Trap
device Manag
er
Jan 18 2002 23:59:48