System Management Commands
611
4
This command lists concurrent telnet connections to remote hosts that were opened
by the current telnet session to the local device. It does not list telnet connections to
remote hosts that were opened by other telnet sessions.
Example
The following example displays connecting to 176.213.10.50 via Telnet.
Related Commands
resume
resume
The resume User EXEC mode command enables switching to another open Telnet
session.
Syntax
resume [connection]
Parameters
• connection — The connection number. (Range: 1 - 4 connections)
Default Setting
The default connection number is that of the most recent connection.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines for this command.
sunrpc Sun Remote Procedure Call 111
syslog Syslog 514
tacacs TAC Access Control System 49
talk Talk 517
telnet Telnet 23
time Time 37
uucp Unix-to-Unix Copy Program 540
whois Nickname 43
www World Wide Web 80
Console> telnet 176.213.10.50
Esc U sends telnet EL
To Next Page
Loading...
