Alcatel OmniStack LS 6248 - Show Qos Aggregate-Policer

Command Line Interface
480
4
exceeds 124,000 bps or the normal burst size exceeds 96000 bps, the packet is
dropped..
Related Commands
police
show qos aggregate-policer
police aggregate
show qos aggregate-policer
The show qos aggregate-policer User EXEC mode command displays the
aggregate policer parameter.
Syntax
show qos aggregate-policer [aggregate-policer-name]
Parameters
• aggregate-policer-name — Specifies the name of the aggregate policer to
be displayed.
Default Setting
This command has no default configuration.
Command Mode
User EXEC mode
Command Usage
There are no user guidelines.
Example
The following example displays the parameters of the aggregate policer called
policer1.
Related Commands
police
qos aggregate-policer
police aggregate
Console (config)# qos aggregate-policer policer1 124000 96000
exceed-action drop
Console> show qos aggregate-policer policer1
aggregate-policer policer1 96000 4800 exceed-action drop
not used by any policy map