Command Line Interface
682
4
switchport trunk native vlan
switchport general allowed vlan
switchport general pvid
switchport general ingress-filtering disable
switchport general acceptable-frame-type tagged-only
show interfaces switchport
switchport access multicast-tv vlan
show vlan
The show vlan Privileged EXEC mode command displays VLAN information.
Syntax
show vlan [id vlan-id | name vlan-name]
Parameters
• vlan-id — specifies a VLAN ID.
• vlan-name — Specifies a VLAN name string. (Range: 1 - 32 characters)
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays all VLAN information.
Console# show vlan
VLAN Name Ports Type Authorization
---- ------- -------- ---- -------------
1 default 1/e1-e2, 2/e1-e4 other Required
10 VLAN0010 1/e3-e4 dynamic Required
11 VLAN0011 1/e1-e2 static Required
20 VLAN0020 1/e3-e4 static Required
21 VLAN0021 static Required
30 VLAN0030 static Required
31 VLAN0031 static Required
To Next Page
Loading...
