Alcatel OmniStack LS 6248 - Qos Map Dscp-Dp; Qos Map Policed-Dscp

QoS Commands
487
4
qos map dscp-dp
Use the qos map dscp-dp Global Configuration mode command to map DSCP to
Drop Precedence. To return to the default setting, use the
no form of this command.
Syntax
qos map dscp-dp dscp-list to dp
no qos map dscp-dp
Parameters
• dscp-list — Specifies up to 8 DSCP values separated by a space.
• dp — Enter the Drop Precedence value to which the DSCP value
corresponds. (Possible values are 0 - 2 where 2 is the highest Drop
Precedence)
• dp — Enter the Drop Precedence value to which the DSCP value
corresponds. (Possible values are 0 - 1 where 1 is the highest Drop
Precedence)
• Parameters Range
• dscp-list 0 -63
• dp 0 -2
• dp 0 -1
Default Setting
All the DSCPs are mapped to Drop Precedence 0.
Command Mode
Global Configuration mode.
Command Usage
There are no user guidelines for this command.
·Example
The following example maps DSCP value 123 to Drop Precedence 1.
Related Commands
show qos interface
qos map policed-dscp
The qos map policed-dscp Global Configuration mode command modifies the
policed-DSCP map for remarking purposes. To return to the default map, use the
no
form of this command.
Syntax
qos map policed-dscp dscp-list to dscp-mark-down
no qos map policed-dscp
Console (config)# qos map dscp-dp 123 to 1